Experiencing a Windows 11 Boot Loop? Solve the Issue Now with These Tools - troubleshooting guide

Updated by

Sherly 

Written by

Tracy King 

Updated on April 22, 2024

Are you running Windows 11? There's a possibility that you might encounter an infinite boot loop error.

If your PC continually restarts numerous times and fails to reach the login screen, you undoubtedly have an issue at hand.

This boot loop error is not commonly encountered in older versions of Windows. However, it is quite frequent in Windows 11 and Windows 10.

The Windows 11 boot loop error typically occurs due to corrupted registry files, which can prevent computers from starting up normally. This results in an endless cycle of Windows startup attempts, continuously restarting your PC.

This issue isn't spontaneous. Before your computer gets stuck in loops, you might notice some irregularities in your Windows 11 system, such as:

• Your PC might operate slower than normal
• Some functionalities, such as audio, video, and others, may not work properly on your PC
• The system shows a black screen with an "Preparing automatic repair" or "Diagnosing your PC" error message
• Blue screen error messages appear, such as "Your PC did not start correctly" or "Automatic repair couldn't repair your PC"
• Your programs might abruptly stop in the middle, etc.

Now, don't worry. This post will provide all the troubleshooting solutions to quickly fix the Windows 11 boot loop error. Just make sure to follow this guide step by step.

当然，我很乐意帮助你。请提供你想要翻译的语言内容。

What Causes a Windows 11 Boot Loop?

You're already aware that Windows registry files are the primary cause of the Windows 11 boot loop issue. Let's now identify which specific registry files are the problem:

• Unauthorized Windows 11 ISO Files: If you haven't installed genuine Windows 11 ISO files on your computer, it can lead to various system issues. Therefore, make sure to download Windows 11 ISO files only from Microsoft's official website.

• Incomplete Windows Update: If your Windows 11 update gets interrupted due to issues like poor internet connectivity, it can result in a boot loop issue. The ideal solution in this case is to disable automatic Windows updates on your computer. This allows you to initiate the update process when your PC is connected to a stable internet connection.

Incompatible Device Drivers: Installing incompatible drivers forcefully can lead to the Windows 11 boot loop error. To prevent this issue, ensure you always install compatible drivers by checking the list of Microsoft Windows 11 compatible drivers online.

Malware Attack: If you don't have antimalware or antivirus software installed on your Windows 11, viruses can infiltrate and damage your registry files. Therefore, it's crucial to always ensure that you have a robust antivirus program installed on your PC.

• Installation of Faulty Applications: Certain games and applications can overload your system and cause infinite boot loop errors. If your system fails to start after installing particular apps or games, it's recommended to uninstall that program.

Next, we'll provide several solutions to fix the Windows 11 boot loop issue. If others encounter the same problem, feel free to share this article to assist them.

How Do I Get Rid of Windows 11 Boot Loop? Troubleshoot The Error Now

Now, let's delve into the main subject: how to fix the Windows boot loop issue? Occasionally, this error might arise due to minor issues like malfunctioning applications or incompatible drivers. In such instances, you can apply some swift solutions to rectify the problem, such as:

Quick Fixes for Windows 11 Boot Loop

< strong > 1. Disconnect external drives and restart Windows 11

Sometimes the external drives connected to your computer are the issue. These drives might have viruses or corrupted files that affect your Windows registry. To resolve this quickly, disconnect all external drives from your computer, then restart your Windows 11 to observe its boot behavior.

< strong > 2. Run an antivirus scan

As we've already discussed, viruses and malware can corrupt your Windows registry files, leading to various system errors, including an infinite boot loop. To address this, simply run an antivirus scan on your computer and eliminate all system vulnerabilities.

If you encounter the boot loop error on Windows 10, you can click the link to refer to the step-by-step guide:

How to Fix Windows 10 Boot Loop | 100% Working Solutions

Encountering a Windows 10 boot loop? Stay calm. Explore this comprehensive guide with tools to troubleshoot the issue and safely use your Windows 10 PC.

3. Check and enable Secure Boot Mode

Secure Boot Mode is an embedded security feature in Windows 11 that ensures a secure environment for starting your system. Please verify if Secure Boot Mode is activated on your device to ensure a safe booting of your PC.

Steps to Check and Enable Secure Boot Mode: 1. Restart your computer: Press the power button to turn off your device, then press it again to start it up. 2. Access the BIOS or UEFI settings: As your computer is booting up, watch for a message on the screen that indicates how to enter the BIOS or UEFI setup. Common keys to press are F2, F10, F12, DELETE, or DEL, but it may vary depending on your computer's manufacturer. 3. Enter the password (if applicable): If your BIOS/UEFI is password protected, enter the correct password to proceed. 4. Navigate to the Security or Boot options: Use the arrow keys to move through the menu and find the "Security" or "Boot" tab. 5. Locate Secure Boot option: Within the Security or Boot section, search for an entry named "Secure Boot" or "Secure Boot Control." 6. Enable Secure Boot: If Secure Boot is disabled, select it and press Enter. Then, choose "Enable" or "On" from the options provided. 7. Save and Exit: Once you've enabled Secure Boot, navigate to the "Save & Exit" option, usually labeled "Exit Saving Changes" or "Apply Changes." Press Enter, and confirm that you want to save the changes when prompted. 8. Reboot: Your computer will restart with Secure Boot now enabled. The system will verify and only allow signed operating system components to load during startup. Note: Disabling Secure Boot may be necessary for installing certain operating systems or custom firmware. Always refer to the installation guide for specific instructions.

Step 1. Open the Start Menu, then navigate to System Information > System Summary > Check if the Secure Boot State option displays "On" or "Off" next to it.

Step 2. If Secure Boot Mode is disabled on your computer, you can enable it by clicking on Settings > Update & Security > Recovery > Restart now under the Advanced startup section.

Step 3. Next, navigate to Troubleshoot > Advanced options > UEFI Firmware Settings (this option will not be available in Legacy BIOS) > Restart button.

Step 4. Open the security settings page.

Step 5. Select the Secure Boot option and press Enter. Then, choose the Enabled option.

Step 6. Exit the UEFI settings and restart your computer.

If these quick fixes haven't resolved the issue for you, don't worry. You can attempt more advanced solutions to address the Windows 11 boot loop error.

7 Solutions for Windows 11 Stuck on Boot Screen

Here, we've selected our most effective methods to help you fix the problem of Windows 11 being stuck on the boot screen. Before attempting any of these, make sure you have a stable power supply.

Method 1: Run Windows Automatic Repair

Automatic Repair is a built-in Windows recovery utility that can diagnose and resolve common boot issues in Windows 11. This feature is automatically activated when the system fails to boot up successfully in two consecutive attempts.

This tool performs several diagnostic tests to identify and self-correct booting issues. If the Automatic Repair feature is disabled on your computer, you can activate it to resolve Windows 11 boot loop errors. To enable Windows Automatic Repair, follow these steps:

Step 1. Boot into a command prompt.

Step 2. Type "bcdedit" in the Command Prompt and press Enter.

Step 3. Enter the following command to enable Windows Automatic Repair:

bcdedit /set {identifier} recoveryenabled Yes This command translates to: bcdedit /set {identifier} recoveryenabled Yes In English, this is a command used in the Windows operating system to enable the recovery options for a specific boot entry identified by "{identifier}".

Step 4: Close the Command Prompt and start your Windows 11 to automatically repair the boot loop error.

Read Also: Blue Screen of Death Error 0x000000C5

Method 2: Repair Boot Drive from Command Prompt

If your boot repair is not functioning correctly, it can also lead to the Windows 11 boot loop issue. To rectify the boot drive, you can utilize the following Command Prompt:

Step 1. Go to Troubleshoot > Advanced options > Command Prompt.

Step 2. Type bootrec.exe /rebuildbcd and press Enter.

Step 3. Type bootrec.exe /fixmbr and press Enter.

Step 4. Type "bootrec.exe /fixboot" and press Enter.

Step 5: Once you've successfully executed each command, type 'exit' and press Enter. After that, restart your PC to see if the Windows infinite boot loop issue persists.

Method 3: Clean the Windows SoftwareDistribution Folder and Reinstall Windows 11

The "SoftwareDistribution" folder is a crucial element for Windows Update. It serves as a temporary storage space for files necessary to install new updates on your Windows 11 device.

However, if you encounter a Windows 11 boot loop issue following an app update or Windows file modification, it's safe to clear the SoftwareDistribution folder. Additionally, reinstall Windows 11 after emptying the SoftwareDistribution folder to ensure that a faulty Windows OS isn't the root cause of the problem.

To remove content inside the SoftwareDistribution folder, follow these steps:

Step 1. Go to the Start Menu, right-click on it and select 'Run as administrator.' Type 'net stop wuauserv' and press Enter.

Step 2. Type the following command to stop the Background Intelligent Transfer Service, and then press Enter:

"Net stop bits" translates to "Stop bits network" in English.

Step 3. Press the Windows key and R key on your keyboard simultaneously to open the Run command.

Step 4. Navigate to this path in File Explorer:

C:\Windows\SoftwareDistribution

Step 5: Select all the content and click on the Delete button.

Step 6. Return to the Command Prompt and enter the following command to start the Windows Update Service:

"net start wuauserv" translates to "net start wuauserv" in English. This is a command used in the Command Prompt of Windows operating systems to start the Windows Update service.

Step 7. Next, enter this command to start the Background Intelligent Transfer Service and press Enter:

"net start bits" in English would be translated as "net start bits."

Step 8. You can now proceed to the Microsoft website and reinstall the Windows 11 ISO files on your computer.

Method 4: Utilize the Windows 11 Update Support Service

If all these Command Prompt-based solutions are overwhelming you, you can seek assistance from the Windows 11 Update Support Service tool. Their technical team will offer comprehensive solutions to address the Windows 11 boot loop issue and numerous other errors.

Sure, please provide the text that needs to be translated.

Additional Tips for Managing and Optimizing Windows 11 Disk

To prevent the Windows 11 boot loop error or any other system errors, efficiently manage and optimize your disk with these tips:

Manage Hard Drives, Optimize SSD Performance

You can use Partition Master tools to manage disk space and all your partitions. The software will merge, resize, edit, format, delete, and permanently wipe data from your hard disk to protect your system.

[1] The "Resize/Move" feature allows you to adjust the space of a selected disk partition as desired. Right-click "Resize/Move", you can shrink a volume, extend another one, or create unallocated space for specific use.

[2] The "Clone" function is used to create two identical hard disks or partitions with the same layout and content. You can use the "Clone" feature to upgrade a hard disk, replace a failing one, back up drive data, and more.

[3] "Delete" is a common method to remove an unwanted disk partition, transforming it into unallocated space.

[4] "Format" is a term commonly used in various scenarios. Formatting a drive partition allows you to change the file system, rectify some corruption issues, and occasionally eliminate viruses and malware.

[5] The "Allocate space" feature comes in very handy when you have too much space on one drive partition and not enough on another.

[6] "Migrate OS" makes it easy to transfer a Windows installation to another drive without needing to reinstall.

[7] Conversions between GPT and MBR, NTFS and FAT32, as well as Basic to Dynamic, are becoming increasingly popular among Partition Master users. In addition to all the benefits mentioned, there are numerous practical features waiting for you to discover.

Backup Windows 11 Operating System

For safety purposes, it's recommended to back up your Windows 11 operating system and other data. To backup Windows files, folders, applications, and system settings, you can utilize the assistance of the software tool Todo Backup. You can find more information about it at Todo Backup website.

Step 1. On the main page, click "Select backup contents".

Step 2. Click on the OS category among the four options available.

Step 3. Todo Backup will automatically select your system partition. You just need to choose a backup destination.

Step 4. You can choose to save the backup file on either your Local Drive or NAS.

Step 5. Once the backup process is completed, you can check the backup status, recover, open, or delete the backup by right-clicking the backup task on the left panel.

扫描您的系统

Utilize a robust antivirus and antimalware program to continually scan your system for vulnerabilities and anomalies.

If you encounter other issues while fixing your computer, such as Windows 11/10 getting stuck on "Diagnosing your PC," click the link below for more information:

How to Fix Windows Stuck on Diagnosing Your PC

Is your PC frozen on the 'Diagnosing Your PC' screen, and you're unsure how to proceed? Follow this guide to learn all the solutions for this issue on Windows 10/11.

Closing Remarks

There you go, folks! You've learned all the fantastic methods to resolve the Windows 11 boot loop issue.

Therefore, don't panic if your system gets stuck in endless boot loops. You can proceed to modify your registry files, disconnect external drives, use Safe Mode, or scan your system with antivirus software.

And if nothing works, give a call to the tools team, and we will help you fix all the Windows 11 installation issues.

Furthermore, you can utilize tools like Partition Master, Todo Backup, and other utilities to enhance your Windows 11 experience further.