How to Clone Windows to New SSD [The Most Efficient Way]

Updated By

Tracy King 

Written By

Cici 

Last Updated on May 10, 2024

Are you looking for a reliable way to clone Windows to new SSD without losing data after buying a new SSD? If you need to clone Windows to new SSD, don't worry. This post will offer you one of the best cloning methods. Then, you can move your system and data on Windows to the new SSD without reinstalling the OS.

Before we get into the practical solutions, let's discuss why you'd want to clone Windows to a new SSD in the first place.

Why Clone Windows to a New SSD

Cloning Windows to a new SSD isn't just about copying the Windows data but creating an image of the same drive, including all the data on Windows. An SSD (Solid State Drive) is a solid-state hard drive used for computer storage. There could be several reasons why you'd want to clone Windows to a new SSD:

**1. Get more storage**

SSDs don't come in very large capacities, so you might see low disk space warnings after a few months. If you have a smaller SSD, you can clone it to a larger SSD to get more space. Or, you could clone just your Windows system to a new SSD and use your old HDD for storage.

2. Boost performance

SSDs are more high-performing than HDDs. They operate faster and use much less power. Thus, cloning HDD to SSD can give you better computer performance when reading and writing data.

3. Avoid the hassle of manual installs

For a new computer, you could clone your old one's data to the SSD to avoid the hassle of reinstalling your operating system.

4. Cut budgets

They are now cheaper than they used to be, and they outperform mechanical disks, reducing the cost of computer maintenance.

Regardless of why you need to clone Windows to a new SSD, the most important thing is to find a feasible method. Unfortunately, Windows doesn't offer cloning service. Luckily, you can use a professional cloning software - AOMEI Partition Assistant Professional, which can clone Windows to new SSD quickly and safely.

Let's see how to use this reliable tool to clone Windows to a new SSD.

How to Clone Windows to a New SSD

AOMEI Partition Assistant is a powerful cloning software that supports SSD 4K alignment to ensure the performance of your SSD is not compromised. It's also an easy-to-use tool. Even if you're a beginner, you can operate the cloning method effortlessly. To clone Windows to a new SSD, you need to initialize the new SSD and make the partition format match the source disk. This section provides three guides to help you clone Windows to a new SSD and boot Windows from the cloned SSD:

Guide 1. Initialize a new SSD

Guide 2. Clone Windows to New SSD

Guide 3. Boot Windows from the cloned SSD

With the assistance of Partition Master, you can easily accomplish initialization and cloning. Let's delve into the step-by-step guidance.

Guide 1: Initializing a new SSD

You can initialize the new SSD as either GPT or MBR. The new SSD needs to have the same partition style as the original disk. Download the Partition Master tool to see how it's done.

< strong > Step 1. < /strong > Launch Partition Master and enter the partition management interface.

Step 2. Right-click on the target disk - HDD or SSD, and choose "Initialize as MBR" or "Initialize as GPT". Click "Execute Task" and "Apply" to save the changes.

0:00-0:18 Initialize as MBR; 0:19-0:44 Initialize as GPT;

This is an HTML code for embedding a YouTube video. When displayed on a webpage, it will show a video player 700 pixels wide and 410 pixels tall, with support for full-screen, clipboard writing, encrypted media, gyroscope, and picture-in-picture features. The video ID is "K2WdkFn6F5w".

Guide 2: Clone Windows to New SSD

Once the SSD is initialized, you can work with it as you would with any other drive. You can then clone Windows to the new SSD.

Let's see how to do it.

Step 1. Launch AOMEI Partition Assistant, go to "Disk Clone" tab, select "Clone System Disk" and click "Next".

Step 2. Select the new drive you want to clone your operating system to, then click Next.

Select the target disk to clone OS to

Click “Yes” to confirm that you want to proceed with the OS disk cloning process.

Step 3. Review the disk layout, and click Start to begin the OS cloning process.

4. When it's done, you'll see a message asking if you want to boot from the cloned disk.

• Restart Now restarts your computer immediately and configures it to boot the operating system from the new disk.
• Finish indicates that you want to make the changes later.

Guide 3: Boot Windows from the Cloned SSD

Follow these steps to set the cloned SSD as the boot drive, and then you can start Windows from the cloned SSD.

Step 1: Restart your computer and press F2/F8/Del to enter BIOS.

Step 2: In the live environment, set the cloned SSD as the boot drive.

Step 3: Save the settings and exit.

What else can Partition Master do?

As a comprehensive disk partition manager, Partition Master also has the following cloning features:

• Clone Larger HDD to Smaller SSD
• Clone Windows to External Hard Drive
• Clone SD Card to External Hard Drive
• Clone SD card, USB or external hard drive

In addition, Partition Master can also completely wipe hard drive after cloning to free up more space. Download and experience this excellent PC partition assistant by clicking the button below!

Conclusions

After reading this guide, do you know how to clone Windows to a new SSD effectively? This article analyzes the reasons for cloning Windows to a new SSD and provides a reliable cloning method. Using the tool Partition Master is both fast and secure. Remember to format the new SSD before cloning. Otherwise, your computer will prevent the SSD from working. With the Partition Master tool, this cloning operation is a breeze!

Frequently Asked Questions About Cloning Windows to a New SSD

Here are some more common questions about cloning Windows to an SSD. Keep reading if you have more queries.

1. Does Windows 10 have cloning software?

Windows 10 doesn't have a built-in cloning software. While Windows 10 provides Disk Management and the Diskpart command for managing disks and partitions, neither of these support cloning. System Imaging is more of a backup feature that allows you to restore an old system if your current one becomes damaged. For cloning, you can use tools like Partition Master.

If you replace your SSD, do you need to purchase Windows again?

If you replace your current SSD with a new one, you don't need to purchase Windows again; you just have to reactivate your account. If you clone Windows to the new SSD, the old system's data and programs come along for the ride, so you wouldn't need to repurchase Windows in that case, either.

3. How do I migrate my entire system to the new SSD?

You can format the new SSD using a partitioning tool, then follow these steps to migrate your system to the SSD.

Step 1. Download and launch Partition Master. On the left, select "Clone."

Step 2: Select the target disk and click “Next”.

Step 3: Click “Yes” on the warning message screen.

Step 4. Click “Start” to begin the OS migration to the SSD.