3 Efficient Ways to Check SSD for Errors on Windows 10/11 翻译结果： 3 Efficient Methods to Check SSD for Errors on Windows 10/11

Updated by

Linda 

Written by

Sherly 

Updated on April 22, 2024

SSDs used to be very expensive. However, prices have been dropping for a while now as more advanced devices hit the market.

Although SSDs offer users enhanced performance and numerous advantages, these drives are delicate and susceptible to errors at any given time. This is where the situation becomes more intricate. However, fret not; in this article, the tools will present you with two methods to address this issue.

Overview of Checking SSD for Errors on Windows 10/11:

Windows enables you to scan for errors on an SSD using the "CHKDSK" command, but this can be challenging for those without substantial computing experience. Therefore, for novices, selecting a user-friendly third-party tool is crucial. In our testing, a particular third-party utility distinguished itself due to its stability, compatibility, and intuitive interface.

Method 1: Check SSD for Errors using Partition Master Tool

Firstly, we recommend using dependable software to scan for errors and identify bad sectors on your SSD, such as the Partition Master tool. This utility can assess the SSD's health status and display a score based on the test results. It will issue a warning when the SSD's condition is unhealthy or if there are too many errors. Install the software on your PC and initiate the SSD check.

To assist in detecting errors on an SSD, this tool can perform the following tasks:

• Guide 1. Check SSD Health via SMART Status
• Guide 2. Check SSD for Bad Sectors
• Guide 3. Check SSD for File System Errors

The tool Partition Master can inform you about the health of your SSD, the number of bad sectors it has, and any file system errors present on the SSD. It offers more detailed information compared to the CHKDSK command. Let's proceed.

Guide 1: Check SSD Health via SMART Status

Here's how to use Partition Master to check the SSD SMART status:

Step 1. Launch AOMEI Partition Assistant and click the blue arrow to activate the "Disk Health" feature under the "Discovery" section.

Click the blue arrow.

Step 2. Choose the target disk and click the "Refresh" button. You will then see the health status of your disk.

Guide 2: Check SSD for Bad Sectors

The tool Partition Master can assist you in running a disk surface test on your SSD or checking the hard drive for bad sectors to help identify any problematic areas:

Step 1. Open AOMEI Partition Assistant. Right-click the disk that you wish to check, and then select "Surface Test".

Step 2. The operation will be performed immediately, and all bad sectors will be marked in red.

Guide 3: Check SSD for File System Errors

Follow these steps to check for file system errors on your SSD:

Step 1. Right-click the problematic partition.

Step 2. Choose "Advanced" > "Check File System".

Step 3. Confirm whether you want to hide the partition or not.

Step 4. In the Check File System window, select the "Try to fix errors if found" option.

Step 5. Click "Start" to scan for errors on your partition.

Moreover, various tools can perform numerous tasks to help you manage your SSD efficiently, such as:

1. ✅Wipe or format an SSD
2. ✅Initialize a new SSD
3. ✅Run SSD SMART test
4. ✅Test SSD read/write speed
5. ✅Clone SSD to a larger SSD
6. ✅Merge or split partitions on SSD

Now, download this tool to effectively manage your SSD. You'll need it to inspect the SSD's health or test its speed.

Way 2: Check SSD for Errors with CHKDSK

You can easily detect bad sectors and file system errors on your SSD by running CHKDSK (short for "check disk") in Windows. This command will report the total number of faulty sectors after scanning the SSD; make sure to run CHKDSK regularly. However, if you're looking for more detailed information about your SSD, refer to Method 1.

Here's how to run CHKDSK to check your SSD for errors:

Step 1. Type cmd in the Windows search box and select Run Command Prompt as administrator.

Step 2. In the Command Prompt window, type the command chkdsk C: /f /r /x

By using the chkdsk command [chkdsk C: /f /r /x], you can examine your SSD for errors and scan for file system corruption and bad sectors, repairing them if any issues are detected.

Method 3: Check SSD for Errors via Windows Properties

Aside from the methods mentioned, you can also use Windows Properties to check for errors on SSDs. Here's how:

Step 1. In File Explorer, click on This PC, right-click the SSD you wish to check, and select Properties.

Step 2. Select the "Tools" section > choose the Check option under the error checking section.

Step 3. Next, you can choose to Scan the target drive or repair the drive if errors are found.

Step 4. Once the scan is complete, click the "Show Details" link to view the CHKDSK logs in the Event Viewer.

You may also like:

Conclusion

Your SSD may occasionally report errors. Regularly checking your SSDs or partitions for errors enables you to identify the specific issues with your SSD, allowing for easy rectification. Since disk errors can stem from various causes such as bad sectors, improper shutdowns, malware, physical damage, and more, it's crucial to know how to detect these issues. This article presents three efficient methods to help you check for errors on your SSD. However, if your SSD sustains significant physical damage, it's advised not to follow these methods and instead seek professional repair or promptly replace the SSD to prevent further loss.

If these methods do help you, don't forget to share this article on your social media.

"Check SSD for Errors" FAQs

It's a frequent issue when an SSD (Solid State Drive) reports an error. Here are some additional questions and answers that might assist you in addressing problems related to errors on an SSD:

< strong > 1. Should you scan an SSD for errors?

Of course, you should. An SSD (Solid State Drive) is a storage device that utilizes integrated circuit components. SSDs offer higher stability and faster data access speeds compared to HDDs (Hard Disk Drives). However, they do have a finite lifespan. Consequently, it's essential to periodically check for and rectify errors on your SSD over time.

**2. How do I ensure my SSD is clean?**

To clean your SSD, you need to follow these steps:

Translate the following text into English: 1. Ensure that your SSD is connected to the PC and is not set as the boot drive. 2. Right-click on the Windows icon and select or launch Disk Management. 3. In the lower right-hand pane, locate the SSD that you want to clean. 4. Right-click on each partition and choose Delete Volume.

**3. How to check SSD for errors in Linux?**

The simplest method to check the health of an SSD in Linux is by using the command-line utility called smartctl. This tool is part of the smartmontools package, which needs to be installed first before you can assess the SSD's health in Linux.

Translate the following text into English:
• Install the smartmontools package by running the command "sudo apt install smartmontools."
• Execute the command "sudo smartctl -t short -a /dev/sdX" (replace "sdX" with the name of your SSD).
• Once the test finishes, run "sudo smartctl -a /dev/sdX" to view the results.