"Automatic Repair cannot fix your computer (Causes and Solutions)"

Updated By

Linda 

Updated on April 22, 2024

When your Windows 11 or 10 fails to boot, and you're shown the error message Automatic Repair couldn't repair your PC, along with the log file location: D:\Recovery\WindowsRE\Winre.wim\System32\Logfiles\Srt\SrtTrail.txt, it can be frustrating.

If you're having trouble with "Startup Repair" or "Automatic Repair" not working, don't worry! This article from Tool has got you covered with comprehensive methods to help you fix the issue. Browse through each method to find the solution that suits your computer best.

The main reason for "Automatic Repair cannot repair your PC"

When your computer displays the "Automatic Repair/Startup Repair can't repair your PC" message, it could be due to several reasons. Here are a few common causes of this issue:

7 Solutions to Fix "Automatic Repair Couldn't Repair Your PC" Error

In this section, you'll learn seven ways to troubleshoot and fix an autopilot that's failing to engage.

Solution 1: Perform a system restore

If your computer fails to start up and Automatic Repair can't fix your PC, you can first try to restore your system to the latest restore point. This will revert your system to a previous state when your computer was still working normally. Follow these steps to perform a System Restore:

Step 1. Press the boot key (usually F11) to enter the Windows Recovery Environment as your computer starts up.

< strong >Step 2< /strong > Go to Troubleshoot > Advanced options > System Restore.

Step 3: The System Recovery Options window should come up. Select your administrator account and click “Continue.”

< strong > Step 4. < /strong > Next, choose a restore point and click "Next" to proceed. The "Scan for affected programs" feature will display any programs that will be removed in the process.

（This line of text represents the HTML code for an image displaying "system-restore-windows-10-8", with a height of 406 pixels and a width of 500 pixels. The source of the image is "/images/en/screenshot/todo-backup/guide/system-restore-windows-10-8.png".）

Step 5. Click “Finish” to confirm the restore point, and then click “Yes” to start the process.

However, this method won't work for you or your Windows if no restore point was created beforehand.

Solution 2: Troubleshoot in Safe Mode

Safe Mode only loads a bare minimum collection of drivers and services for the Windows operating system. It allows you to boot into a secure environment so you can fix problems with your system. Here's how to enter Safe Mode and fix your system:

Step 1. Press a key (usually F11) during startup to enter the Windows Recovery Environment.

Step 2: Go to Troubleshoot > Advanced options > Startup Settings > Restart.

Step 3. Press "4" or "F4" to enter Safe Mode.

Step 4. While in Safe Mode, try to identify the cause, such as recent Windows updates, newly installed programs or drivers, viruses, malware, and so on, then fix them.

Solution 3: Repair the Boot Record

A corrupted system file can also prevent Automatic Repair from fixing your computer. The Boot Configuration Data (BCD) is part of your computer's boot record, which is used to start the Windows operating system. Rebuilding the BCD file can help you fix the boot record and resolve this issue.

To fix the MBR, you need the assistance of a reliable boot repair tool. As one of the best boot repair utilities, Partition Master Professional provides a powerful feature that can automatically detect and fix common boot errors in the system.

Please rebuild the boot configuration data as instructed below:

Step 1. After connecting the external hard drive/USB to the computer, launch Partition Master and go to “Bootable Media” and then click on “Create Bootable Media.”

Step 2. Select a USB drive or CD/DVD that you have available, then click "Create." You can also burn the Windows ISO file to your media.

Step 3. Connect the boot drive you created to the new computer and press F2 or Del to enter BIOS. Set the WinPE boot drive as the boot disk, then press F10 to exit.

Step 4. Restart your computer and enter the WinPE interface. Then, open the Partition Master tool and click “Boot Repair” under “Toolbox”.

Step 5: Select the system you want to fix, then click on “Repair”.

Step 6. Wait for the process to finish, and you'll receive a notification that the system was successfully repaired. Click OK to finish the startup repair process.

If this tool has been helpful to you, don't forget to share it with your friends and family.

Solution 4: Disable Automatic Restart on Failure

Issues with Windows startup can lead to an automatic repair loop that prevents your PC from accessing the Windows operating system. If you're stuck in such a startup repair loop, you can disable this feature, which might resolve your problem. Follow the guide here to prevent your system from automatically entering Automatic or Startup Repair mode:

Step 1. Press the hotkey (usually F11) while starting up your computer to enter the Windows Recovery Environment.

Step 2: Go to Troubleshoot > Advanced options > Startup Settings.

Step 3: Press "9" or "F9" to disable the automatic restart on failure.

Solution 5: Disable Early Launch Anti-Malware Protection

Early Launch Anti-Malware (ELAM) is an advanced system protection security feature that boots an antivirus or anti-malware program before any other third-party drivers. However, ELAM can also interfere with the Automatic System Repair utility.

Please try disabling ELAM per the instructions below, and see if that resolves the issue:

Step 1. Press the boot key (usually F11) to enter the Windows Recovery Environment when your computer starts up.

Step 2. Go to Troubleshoot > Advanced options > Startup Settings.

Step 3. Press the "8" or "F8" key to disable Early Launch Anti-Malware Protection.

Solution 6: Run DISM and System File Checker

The DISM tool and System File Checker are built-in Windows utilities designed to fix system errors. If the issue is caused by corrupted system files or registry entries, you can run these command lines to repair corrupted registry items. Here are the detailed steps:

Step 1. Press the boot key (usually F11) while starting up your computer to enter the Windows Recovery Environment.

Step 2. Go to Troubleshoot > Advanced options > Command Prompt.

Step 3: Type the following commands, pressing Enter after each line:

The following pages provide more information and details about the SFC, CHKDSK, and DISM commands.

Since you haven't provided specific English content, I can't translate it directly. However, here's a general rule: when translating from English to Chinese, it's usually advisable to retain HTML tags, as they are crucial for the structure and functionality of web pages. HTML tags don't affect the literal meaning of the text but instruct the browser on how to display the content. For example, if the English content is: ```html

Welcome to our website!

Welcome to our website!

The tag is used to enclose a piece of text, which remains unchanged in the Chinese translation.

Hello, World!

Hello, world!

The Difference Between SFC, CHKDSK, and DISM in Windows 11

Are you confused about the differences between SFC, CHKDSK, and DISM in Windows 11? On this page, we will provide you with comprehensive information on these command-line utilities. Read More >>

Solution 7: Reset your computer

If none of the above solutions work for you to fix Windows 10 or Windows 11 Startup Repair not working issue, the last thing you can try is to reset your computer.

Step 1. Press the boot key (usually F11) to enter the Windows Recovery Environment when your computer starts up.

Step 2: Go to Troubleshoot > Reset this PC.

Step 3: On the next screen, choose “Keep my files,” and then follow the instructions to reset your PC.

If you find this page helpful, please share it on your social media to help more users.

Conclusions

"Automatic Repair couldn't fix your PC" or "Startup Repair couldn't fix your PC" is a common error message when something goes wrong with the Windows operating system. Fortunately, this page offers several methods to guide users through resolving the issue and fixing their computer.

Among all the solutions, Partition Master tool is the most suitable for beginners as it equips many powerful features like bootable repair, rebuild MBR, check file system, etc. These features allow users to troubleshoot in a simple and user-friendly interface. You can download it immediately and enjoy the convenience.

Frequently Asked Questions about "Automatic Repair Couldn't Fix Your PC"

Here are some questions and answers that you might find interesting:

Why does my computer get stuck on the automatic repair screen?

A PC getting stuck on Automatic Repair or Startup Repair can be due to missing or corrupted system files. Issues related to critical files like these can also be the reason why your PC won't start up.

How do I exit the automatic repair loop?

To exit the auto-repair loop, follow these steps:

Turn on your computer and press "F11" repeatedly.

In Windows RE, go to Troubleshoot > Advanced options > Startup Settings.

Press the "9" or "F9" key to disable Automatic Restart on Failure.

3. Does the auto-repair feature work?

An automatic repair typically fixes the most common computer issues and system errors. However, if you're dealing with a more complicated situation, this tool might not cut it.