How to Perform an HP Omen SSD Upgrade [Efficient Methods]?

Updated by

Sherly 

Written by

Cici 

Updated on April 22, 2024

< a href="https://www.omen.com/us/en.html" rel="nofollow noopener" target="_blank">HP Omen is a series of gaming laptops, including models like HP Omen 30L, HP Omen 13/15/16/17. These laptops are powerful and well-suited for seamless and quiet gaming experiences. However, they can easily run out of internal storage space if the game files are substantial in size.

If you're looking to expand your storage or perhaps upgrade your HP Omen from a SATA SSD to an NVMe SSD for enhanced gaming performance, you've come to the right place. Numerous models of HP Omen laptops feature user-upgradable SSD slots, enabling you to replace or add an SSD to boost storage capacity or increase performance. This guide will walk you through the detailed process of performing an HP Omen SSD upgrade without any data loss.

Please provide the list of languages you need translated into English, I'll do my best to assist you.

Many users have queries regarding HP SSD upgrades. Here's a typical case scenario from a forum:

Don't worry about this issue. Continue reading to learn how to proceed with an HP Omen SSD upgrade.

How to Perform an HP Omen SSD Upgrade

This section will provide a summary of the two situations where upgrading the SSD in your HP Omen laptop might be necessary. Following that, a comprehensive guide with detailed steps for both scenarios will thoroughly explain the HP Omen SSD upgrade process. Regardless of your choice, you can download Partition Master to ensure the best preparation before beginning.

Scenario 1: Replace the HP Omen SSD with a Larger One

In this scenario, users wish to upgrade their HP Omen laptop's SSD with a larger capacity to boost its speed and storage. This process consists of three main steps, detailed as follows:

Here are the translations for the provided language segments into English:
1. Stage 1. Add the New SSD to HP Omen
2. Stage 2. Migrate OS to New SSD for Upgrade
3. Stage 3. Move the Original SSD and Boot from the New One

You can also click the social buttons and share your ideas with others who could benefit from them.

Stage 1: Adding the New SSD to HP Omen

Adding a new SSD to your HP Omen laptop involves considering aspects like performance, reliability, and compatibility. First, ensure you know the suitable size and type of SSD for your HP Omen model. For instance, the HP OMEN 16-B1009NL laptop comes with a Gen 4.0 NVMe M.2 SSD slot. Your choice will depend on your requirements and budget. Here are three recommended reliable HP Omen SSD upgrades: 1. HP EX900 NVMe M.2 SSD - This entry-level option offers decent speed and affordability for basic to moderate usage. 2. HP EX920 NVMe M.2 SSD - Providing faster read and write speeds, this mid-range option is ideal for gamers and professionals seeking improved performance. 3. HP Z4000P NVMe M.2 SSD - As a high-end choice, it delivers excellent performance and is suitable for demanding tasks and heavy workloads. Always check the latest specifications and reviews before making a decision, as the market is continually evolving.

Here are the translations of the languages mentioned into English:
• Samsung 4th Generation 1 TB (speed up to 7,000 MB/s)
• Samsung 4th Generation 2 TB (speed up to 7,000 MB/s)
• Crucial 4th Generation 1 TB

Once you acquire a new SSD for your laptop, follow this brief step-by-step guide to connect it externally to the laptop using a data cable or adapter: 1. Ensure that your laptop is turned off and disconnected from any power source to prevent any electrical risks. 2. Get the appropriate cables or adapters for connecting the SSD to your laptop. Most modern SSDs come with a SATA interface, so you may need a USB-to-SATA cable or an external enclosure that supports SATA drives. If your SSD uses the newer NVMe interface, you'll need a USB-C to NVMe adapter or a compatible enclosure. 3. Connect one end of the data cable or the SSD into the adapter, following the manufacturer's instructions. 4. Connect the other end of the cable to an available USB port on your laptop. 5. Power on your laptop and enter the BIOS or UEFI settings by pressing the designated key (usually F2, F10, or Del) during the boot process. The key varies depending on the laptop model. 6. In the BIOS/UEFI settings, look for the boot order configuration. This is usually found under sections like "Boot," "Startup," or "System Configuration." 7. Locate the external SSD in the boot device list, which might be labeled as "USB Drive" or something similar. 8. Move the external SSD to the top of the boot order, ensuring that it becomes the first device your laptop will attempt to boot from. 9. Save the changes and exit the BIOS/UEFI settings, typically by pressing F10 and confirming with 'Yes.' 10. Your laptop should now boot from the external SSD. If the SSD is empty or not yet formatted, you may need to initialize and partition it before using it. You can do this using tools like Disk Management in Windows or Disk Utility on macOS. Remember that connecting an SSD externally might not provide the same performance as an internally installed SSD due to the limitations of USB interfaces. For optimal speed, consider installing the SSD internally if possible.

Step 1. Turn off the computer and unplug all power cords.

Step 2. Open the cover of the HP Omen computer or the HP Omen 30L, HP Omen 15/17.

Step 3. Find the second SSD slot on the motherboard, and connect the original SSD using the adapter.

Connect the HP SSD to your computer as shown in the image below:

Next, you'll need to migrate the operating system and data from the old drive.

Stage 2: Migrate OS to New SSD for Upgrade

Migrating the OS from the old drive to the new SSD allows you to experience seamless operations. The tools Partition Master tool helps to migrate the operating system with just one click. It provides an advanced "Clone Disk" feature that automatically transfers data from one disk to another. Its user-friendly interface makes it easy to use, even for beginners, allowing them to move data from the old drive to the new one effortlessly.

Follow these steps to migrate OS to the new SSD upgrade with the Partition Master tool:

< strong > Steps to migrate OS to HDD/SSD: < /strong >

1. Run tools Partition Master and choose "Clone" from the left panel. 2. Check "Migrate OS" and click "Next". 3. Select the SSD or HDD as the destination disk and click "Next". 4. Warning: The data and partitions on the target disk will be erased. Make sure you have backed up important data beforehand. If not, do so now. 5. Click "Yes" to proceed. 6. Preview the layout of your target disk, then click "Start" to initiate the OS migration to the new disk.

Here's the translation in English:
• After this, click "Reboot Now" or "Done" to choose whether you want to restart the computer from the new disk immediately.

"Reboot Now" means to apply the changes immediately, whereas "Done" indicates that you need to restart your computer manually at a later time.

Important: The OS migration operation will delete and remove existing partitions and data on your target disk if there isn't enough unallocated space on it. Back up any important data to an external hard drive beforehand if necessary.

Other features of using Partition Master:

Stage 3: Move the Original SSD and Boot from the New

Before moving the original SSD, ensure that the data migration is successful. If so, proceed with the steps to transfer the original drive and boot the laptop from the new one.

Step 1: Power off the laptop and remove all wires and devices.

Step 2: Remove the base panel and take out the battery. Use a Phillips-head screwdriver to take out all the screws.

Remove the base panel to perform an HP Omen SSD upgrade.

Step 3: Hold the "Power button" for a few seconds to drain any remaining charge in the system.

Step 4: Remove the SSD slot from the system board. Do not use excessive force.

Step 5: Gently pull the drive out from the edges to remove it.

Step 6: Put the drive in a safe place.

Step 7: Insert the new SSD into the slot and secure it to the system board.

Step 8: Place the battery and screw the base panel.

Here are the solutions for upgrading the HP Omen SSD. If you find this guide helpful, please share it with others by clicking the buttons.

After replacing the SSD, you'll need to alter the boot order in the BIOS settings to ensure that your HP computer boots from the new SSD. Here are the steps to follow:

Step 1: Turn on the computer and press the "F9" key to access the BIOS setup.

Step 2: Use the arrow keys to navigate to the "Boot" or "Boot Order" option.

Select the desired boot drive

Step 3: Select the new SSD from the list and use the "+" and "-" keys to move it to the top.

Step 4: Choose the "Save and Exit" option.

Further reading about changing the boot order:

Situation 2: Add a Second SSD for HP Omen SSD Upgrade

Most HP Omen laptop models come equipped with two NVME M.2 SSD slots, allowing for the convenient addition of a second SSD without requiring the removal of the existing one. When you locate an available slot, you can effortlessly add an extra SSD to your laptop. This straightforward solution enables you to expand storage capacity without the need for physical replacements.

If your main goal with an HP Omen SSD upgrade is to add storage capacity, you can slide the second SSD into the open slot.

The alternative is to replace the outdated SSD with a new one, and then place the old SSD in the second slot if you wish to enhance your system's performance and resolve the issue of the HP laptop running slow.

Here are the steps to install the second SSD: 1. **Shut Down Your Computer**: Make sure your computer is completely turned off and disconnected from any power source, including the wall outlet or power strip. 2. **Access the Internal Components**: Depending on your laptop or desktop model, you may need to remove the back panel or side panel to access the internal components. Consult your computer's user manual for specific instructions. 3. **Check Available Slots**: Locate an available M.2 slot (if you're using an M.2 SSD) or a free 2.5-inch bay (for a standard SATA SSD). Most modern computers have at least one M.2 slot, while older models might require a SATA connection. 4. **Install the SSD**: Carefully insert the SSD into the appropriate slot, ensuring it clicks securely into place. If using a 2.5-inch SATA SSD, attach it to the empty bay with screws provided with the drive or your computer. 5. **Connect the Power Cable**: If using a SATA SSD, connect the power cable from your computer's power supply to the SSD. M.2 SSDs usually get their power directly from the motherboard. 6. **Secure the Cables**: Tuck any loose cables away neatly to prevent them from obstructing other components. 7. **Boot Up and Install an Operating System**: If you plan to use the new SSD as a secondary drive, you may not need to install an operating system. However, if it's your primary drive, you'll need to install one, such as Windows or macOS, following the respective setup process. 8. **Update BIOS/UEFI**: After installation, check for any available BIOS/UEFI firmware updates to ensure optimal compatibility and performance with the new SSD. 9. **Partition and Format the Drive**: In the computer's settings or using a tool like Disk Management (Windows) or Disk Utility (macOS), create a new partition and format the SSD to prepare it for use. 10. **Transfer Data and Set Up Software**: If necessary, transfer data from your old drive to the new SSD and reinstall any software applications you had previously. 11. **Finalize Configuration**: Update your computer's boot order in the BIOS/UEFI settings to prioritize the new SSD, then save and exit. Your computer should now boot from the new SSD. Remember to handle all components carefully to avoid damaging them, and always ground yourself before touching any internal parts to prevent static electricity discharge.

Step 1: Turn off the laptop and remove the base panel.

Step 2: Remove the battery and locate an empty SSD slot on the motherboard.

Step 3: Hold the drive from the edge and plug it in carefully.

Step 4: Screw in the drive, then place the battery and back panel.

If you'd like to know the detailed guide on installing a second hard drive on a PC, click the link:

How Do I Install a Second Hard Drive? Here Is the Complete Guide

On this page, we'll take how to add a new hard drive in Windows 10 as an example to demonstrate the entire process of installing a second disk on a PC. Neither data loss nor boot error will occur.

Conclusion

This article thoroughly explains how to perform an HP Omen SSD upgrade. It covers two situations: replacing the existing SSD and installing a second SSD in your HP Omen laptop. Both scenarios are described in detail with step-by-step instructions to make the process straightforward. For cloning data from one drive to another, the recommended software is Partition Master. Its intuitive user interface and advanced functionalities offer an easy and dependable method for upgrading the SSD.

Frequently Asked Questions About Upgrading HP Omen SSD

If you have further questions regarding How to upgrade the HP Omen SSD, please refer to the FAQ section for answers.

**1. How many SSD slots does the HP Omen have?**

The majority of HP Omen laptops come with two NVME M.2 SSD slots, enabling you to add a second SSD without needing to remove the first one.

< strong >2. What SSD is compatible with HP Omen? Translation: < strong >2. Which SSD is compatible with HP Omen?

HP Omen laptops typically support NVMe M.2 SSDs. When searching for SSDs compatible with your specific HP Omen model, make sure they have the proper integration and interface, which is often M.2 and NVMe.

3. How to perform an HP M.2 SSD upgrade?

Here's a concise step-by-step guide for performing an HP M.2 SSD upgrade: 1. **Backup Data**: Before starting any hardware upgrade, it's crucial to back up all important data on your current storage device to an external hard drive or cloud service. 2. **Gather Tools and Components**: You'll need an M.2 NVMe SSD compatible with your HP laptop, a screwdriver (usually a Phillips head), and the necessary installation kit (if provided). 3. **Shut Down and Unplug**: Turn off your HP laptop, unplug all power sources, and remove the battery (if accessible) to ensure safety during the upgrade process. 4. **Access the M.2 Slot**: Locate the M.2 slot on your laptop's motherboard, which is typically under a cover or accessed by removing the bottom panel. 5. **Remove Existing Drive (if present)**: Unscrew and carefully remove the existing M.2 SSD, if there is one. 6. **Install New SSD**: Align the new M.2 SSD with the slot, ensuring the notches match, and gently push it in until it clicks into place. 7. **Secure the SSD**: Screw the SSD into the slot or attach it using the provided brackets to prevent it from moving. 8. **Reassemble the Laptop**: Replace any covers or panels you removed, secure them with screws, and reinsert the battery (if applicable). 9. **Boot Up and Install OS**: Power on your laptop and enter the BIOS to configure the boot order, prioritizing the new SSD. Proceed with installing your operating system onto the new drive. 10. **Restore Data and Update Drivers**: Once the OS is installed, restore your backed-up data and update the necessary drivers for optimal performance. Remember, the steps may vary depending on your specific HP laptop model. Always refer to your laptop's user manual for detailed instructions.

Step 1: Turn off the laptop and remove the base panel.

Important: Use a Phillips-head screwdriver.

Step 2: Locate the M.2 SSD and unscrew it.

Step 3: Grip the SSD by a corner and pull it out.

Step 4: Plug in the new SSD and screw it in.